Hydraulic Filtration Systems

When every dollar counts, it’s good to know that Northeast Hydraulics can deliver a hydraulic filtration system that will meet all of your requirements, at a price nobody can match, feature for feature, dollar for dollar.

Hydraulic Filter Carts Hydraulic Drum Filter Unit
Hydraulic Filter Cart Savings

SAVE ON HYDRUALIC FILTRATION COSTS
  • On maintenance cost and downtime
  • By reducing waste oil disposal, as state and federal regulations continue to tighten
Donaldson Filters

UTILIZES QUALITY DONALDSON FILTERS
  • Easy to change spin-on filter elements (no tools needed)
  • Beta rated = 1000 high efficiency filters
  • 10 MIC water absorbing (24 ounces)
Portable Drum Hydraulic Filter Cart
MOBILE HYDRAULIC FILTER CART MODEL NUMBER: NH-FC12-2310
Hydraulic Filter Cart Questions?

This hydraulic filter cart requires 115 Volts AC, 13 Amps, single phase. The on/off switch is lever type and water resistant. The power cord is 12 Ft. long and is of industrial grade. All fluids are petroleum based and the hydraulic filter cart itself weighs 130 lbs (dry).

Filter Cart Features and Benefits Portable Drum Filter Cart
  • 12 GPM Industrial quality gear pump
  • Two quality Donaldson long life filters
  • Heavy duty cart with drip pan
  • Large 10 inch flat free tires
  • 10 ft. long hoses
  • Two steel heavy duty wands
  • 3/4 HP 1 PH industrial motor
  • 10 ft. industrial grade power cord

Filter Elements 
  • Filter 1: Micron- 23 
  • Filter 2: Micron- 10
  • * Add (W) on end of Model number for 10 Micron water absorbing up to 24 OZ

Specifications
  • Pump: 12 GPM gear pump
  • Motor: ¾ HP @ 1725 RPM 1.15 S.F.
Portable Drum Filter UnitPORTABLE DRUM FILTER UNIT
Filter Unit Features & BenefitsPortable Drum Filter Cart
Available in 6 and 12 GPM flow capacities – Industrial quality type pump – Quality Donaldson long life filter – Heavy Duty Frame

Filter Elements
  • 6 Micron 
  • 10 Micron 
  • 23 Micron 
  • 10 Micron water absorbing up to 24 OZ

Specifications –
  • Pump: 6 GPM gear pump & 12 GPM gear pump
  • Motor: ½ HP @ 1750 RPM 1.15 S.F.- ¾ HP @ 1750 RPM 1.15 S.F.

Electrical Service Required:
  •  115 Volts AC, 13 AMP, Singe Phase, 60 Cycles

On/Off Switch: Lever Type, Water Resistant
Power Cord: 12 Ft. Long industrial cord ( 14-3 ) With standard 3-prong plug.
Hose: 10 fT. Long, 3/4” I.D. Steel wire reinforced PVC Hose with 42” suction wand and 36” discharge wandHydraulic Portable Drum Filter Questions?
Fluids: Petroleum Based ( 500 SUS Max )
Weight: 65 lbs. ( dry ) – 80 lbs. ( approximate shipping weigth )